Steps To Take When Water Is Not Coming Out of Your Faucet in Naperville, Illinois

While cooking dinner one night, you turn on the faucet, but nothing comes out. Why is no water coming out of the faucet, and what can you do about it?

Below, learn how to troubleshoot your faucet, then give us a call for plumbing services in Naperville, IL.

No Water Coming out of Your Faucet? Try These Faucet Troubleshooting Tips for Naperville Homeowners

Why do faucets stop working, anyway? There are several possible reasons why your faucet might not be giving you any water, including:

• Blocked pipes
• Closed valves
• Low water pressure
• Frozen pipes
• Broken pipes
• A damaged faucet
• Maintenance work
• Unpaid water bills

In some cases, you can fix a non-working faucet yourself. In others, you’ll need to call a Naperville plumber for help. Read below to learn how to test your faucet and determine whether you need to hire a plumber.

Try Using a Different Faucet

Is the problem isolated to one faucet, or have several faucets throughout your home stopped working? If only one faucet gives you trouble, it could mean that someone has turned off the valve for that sink. The faucet might also be broken or clogged.

If several faucets have stopped working, it indicates that you have a house-wide problem. For instance, you may have a clog somewhere in the main plumbing line.

Check Your Water Main Valve

Are none of the faucets in your home working? If no water flows from any faucet, don’t panic. It’s possible that the water main valve was accidentally shut off by you or someone else in the home.

To check, locate the water main valve—typically found near the water heater or next to the outdoor water meter. Turn the valve counterclockwise to open it fully. If it’s difficult to turn, use a wrench. If water still won’t flow after opening the valve, it may be time to consider professional faucet repair.

Try Both the Cold and Hot Taps

If no water comes out of your faucet, it’s a good idea to determine whether the issue only affects the hot or cold tap. If the hot water works fine, but you don’t get any cold water, there might be something wrong with the cold water supply line.

If the hot water doesn’t work, there could be a problem with your water heater. For example, the unit might have sediment buildup or a faulty pilot light.

Check for Frozen Pipes

Winter weather can be frigid here in Naperville. When temperatures dip below freezing, it’s not uncommon for pipes to freeze. If this happens, your faucet won’t work until the pipes thaw.

If you see frost on your pipes, they’re likely frozen. To help them thaw, open the taps and blow warm air on the pipes with a hair dryer.

Look for Leaks in Your Pipes

Does your home suddenly have unusually low water pressure? If so, this can cause faucets throughout your house to stop working. Often, unusually low water pressure occurs due to a leak in your pipes.

Check the pipes under your sink for leaks. If you don’t see any, there might be a leak in the main line. Still can’t find the leak? The offending pipe might be hidden behind the walls. You’ll need to call a plumber to locate and repair the leak.

Ask Your Neighbors If They Have Running Water

If your entire home suddenly has no water, ask your neighbors if they’re having problems, too. If they say yes, there’s a good chance that a maintenance crew is working on the plumbing on your street.

Call the public works department to learn whether there’s any plumbing work happening in your area and how long the job will take to finish.

Contact the Water Company

It may seem obvious, but have you remembered to pay your latest water bill? If not, your water company may have shut off the supply to your house. Give the company a call to learn if you’re up to date on your bill. Your water company can also tell you about any service disruptions in the area.